When do I need to use Teflon tape, pipe dope or plumber’s putty?

2020-04-22T01:58:36-07:00

Teflon tape and pipe dope are commonly used as pipe sealants. However, Teflon tape is cleaner and easier to use than sticky grease or paste like sealants. Plumber’s putty is used to form a watertight seal on all threaded joints on the plumbing project. Plumber’s putty i [...]

When do I need to use Teflon tape, pipe dope or plumber’s putty?2020-04-22T01:58:36-07:00

Any tips for using tools?

2020-04-22T01:58:09-07:00

Use penetrating oils (such as liquid wrench or WD-40) to help loosen corroded mounting kits. Use a hacksaw or reciprocating saw for cutting steel or plastic pipe. Use a basin wrench for hard to reach areas. Use a tubing cutter to make straight, smooth cuts in plastic or [...]

Any tips for using tools?2020-04-22T01:58:09-07:00

What tools do I need to install or fix my faucet?

2020-04-22T01:58:01-07:00

The most commonly used tools are: Phillips and regular screw drivers Pliers Adjustable wrenches Basin wrench Plumbers socket set Seat wrench Plumber’s putty Teflon tape Check your Olympia Installation Instruction sheet or with your Olympia Sales Representative for the t [...]

What tools do I need to install or fix my faucet?2020-04-22T01:58:01-07:00

Are Olympia faucets easy to install?

2020-04-22T01:58:20-07:00

Olympia strongly encourages you to use certified plumbing contractors to professionally install you Olympia faucet. All Olympia faucets are easily installed with the right tools. [...]

Are Olympia faucets easy to install?2020-04-22T01:58:20-07:00

Are Central Brass faucets easy to install?

2020-04-22T01:52:29-07:00

Central Brass strongly encourages you to use a certified plumbing contractor to professionally install our faucets. Central Brass faucets can be easily installed with the right tools. [...]

Are Central Brass faucets easy to install?2020-04-22T01:52:29-07:00

Can I Make Adjustments to Increase the Flow of Water?

2020-04-22T01:52:05-07:00

The 1992 Energy Policy Act directed manufacturers to restrict the amount of water released from faucets. In some instances, this flow was reduced from 5 GPM (gallons per minute) at 60 PSI (pounds per square inch) to 2.2 GPM at 60 PSI. Therefore, it is advised that you d [...]

Can I Make Adjustments to Increase the Flow of Water?2020-04-22T01:52:05-07:00

Where do I find Central Brass replacement parts?

2020-04-22T01:51:42-07:00

You can find genuine Central Brass replacement parts at your local distributor. Note: Genuine Central Brass replacement parts must be used to ensure warranty coverage. [...]

Where do I find Central Brass replacement parts?2020-04-22T01:51:42-07:00

Does my Central Brass faucet meet code requirements?

2020-04-22T01:51:19-07:00

Central Brass products are designed and manufactured in compliance with the following codes: CSA B125 Certified ASME A112.18.1 ANSI A117.1 (ADA Compliant-Lever Handles Only) NSF/ANSI 61-2002 Federal Safe Drinking Water Act AB1953/S152 NSF-ANSI 372-2011 WaterSense (Lavat [...]

Does my Central Brass faucet meet code requirements?2020-04-22T01:51:19-07:00

Why is the finish deteriorating on my Central Brass faucet?

2020-04-22T01:50:54-07:00

Usually, finish deterioration is due to years of wear and tear, abuse or chemical attack. There is no repair once the finish is damaged, however you have the ability to replace many of the common faucet parts where the deterioration is most noticeable. Please e-mail us [...]

Why is the finish deteriorating on my Central Brass faucet?2020-04-22T01:50:54-07:00